Test Probe with Remote Triggering for METRISO and PROFITEST Series
Earth Tester Set in Carrying Pouch with Space for the GEOHM C
Cable Set for Testers
Cable Set of Measuring Cables for Highohmic and normal Measurements
Alligator Clips, 2 ea.
Guard Cable with 1 Alligator Clip
Extension Cable, 5 m
Floor Probe
Current Clamp 1mA ..1200A, 1mA/A, 40 Hz - 5 kHz, 52mm Ø
Current Clamp Generator 0.2 ..1200A, 1mA/A, 40 Hz - 5 kHz, 52mm Ø
Charger with 4 NiMH Rechargeable Batteries for GEOHM 5
Interface Adapter for Test Instruments to a PC (IrDA-USB)
Ever-ready Case for Testers
Set of Various Items used to warn Unauthorized Persons
Signal Lamp Set
Emergency Stop Switch
Trolley for the Hard Case System of PROFITEST PRIME
Measuring Adapter for Temperature and Humidity
Leakage Current Clamp Meter
Adapter for Current Clamps for PROFITEST PRIME
SK4-L for L conductor (Length 4 m)
SK12-N for N conductor (Length 12 m)
SK4-N for N conductor (Length 4m)
SK12-L for L conductor (Length 12 m)
SK4-PE for PE conductor (Length 4 m)
SK12-PE for PE conductor (Length 12 m)
SK25-PE for PE conductor (Length 25 m)
Intelligent Measuring Probes with Remote Triggering for PROFITEST PRIME (Length 4 m)
Intelligent Measuring Probes with Remote Triggering for PROFITEST PRIME (Length 12 m)
High-voltage pistol
Adapter for Protective Conductor and Insulation Tests
replacement test tips
HV package, PRIME AC
Probes Set, CAT III @ 600 V, 1 A for PROFITEST Master
Flat Test Clip, CAT IV @ 1000 V, 32A for PROFITEST Master
Z853R database expansion for SECUTEST BASE (10)
Adapter for 3-Phase Load Components in Combination with SECUTEST and METRATESTER Series Testers
Test Adapter for Testing Open-Circuit Voltage at Welding Units per EN 60974
Adapter for Testing 3-Phase Devices and Extension Cables in Combination with SECUTEST Series Safety Testers
Adapter for Testing 3-Phase Devices in Combination with SECUTEST Series Safety Testers
Adapter for Testing Protective Conductor and Insulation Resistance of Appliances and Extension Cables
Adapter for Testing 3-Phase Devices in Combination with SECUTEST Series Safety Testers
16 A 3-Phase Current Adapter
32 A 3-Phase Current Adapter
Adapter Cable from CEE16 to CEE32 Plugs
Adapter for Testing Single-Phase Extension Cables
Probe Cable (2m) for Protective Conductor Measurement
Brush Sensor for Testers
Probe Cable for Protective Conductor Measurement and Software - for SECUTEST SIII+ and S2N+W
Patient connector cables
Probe Cable (2m) for Protective Conductor Measurement
Probe Cable (5m) for Protective Conductor Measurement
Test Probe with Pulse Current Generator
Cable set for connecting testers to the mains
Barcode Reader / Scanner with Laser for Test Instruments with RS 232 Port
Barcode Reader / Scanner with Laser for Test Instruments with USB Port
Label Printer Prints Barcode Labels for Identifying Devices and Systems
Thermal Printer for SECUTEST BASE(10), PRO, SECULIFE ST-Family
Label Tape Cartridge Set for Z721D Barcode Printer
Label Tape Cartridges (18 mm) for Z721D Barcode Printer
Thermo Paper for Thermal Printer Z721S
RFID Reader / Writer (13.56 MHz) for Test Instruments with USB Port
RFID Reader / Writer (13.56 MHz) for Test Instruments with RS 232 Port
For Identifying Devices and Systems
For Identifying Devices and Systems
For Identifying Devices and Systems
Leakage Current Clamp Meter for SECUTEST PRO and SECULIFE ST
Plastic System Case for Testers and Accessories
Plastic System Case for Testers and Accessories
for 2 adapters AT16DI or AT32DI or similar
Universal Carrying Bag
Ever-ready Case for SECUSTAR FM
Universal Carrying Pouch Big
Universal Carrying Pouch Big
10 recording charts for printer module
10 printer ribbon cartridges for printer module
Storage and Input Module for SECUTEST with RS232 and USB interface
Interface Converter
Calibrating Adapter for all SECUTEST and METRATESTER
Current Sensor Clamp, 1mA to 15A / to 150AAC, adjustable
2 each in plastic bag, diameter 4 mm, length 1.0 m, 1000 V CAT III, 19 A, blue
2 each in plastic bag, diameter 4 mm, length 1.0 m, 1000 V CAT III, 19 A, black/red
Installation board – “service line with main ground bus” – for fault simulation for testing the effectiveness of protective measures for measurements in accordance with IEC 60364.6 and EN 50110 (DIN VDE 0100-600, 0105-100)
Installation board – “sub-distribution branch with installation circuits” – for fault simulation for measurements per IEC 60364.6 and EN 50110 (DIN VDE 0100-600, 0105-100)
Test adapter for electric charging stations (single/3-phase, type 2) for PROFITEST
Test adapter for electric charging stations (single-phase, type 1) for PROFITEST
Variable Plug Adapter Set
Adapter for Testing Single-Phase Extension Cables (Coil Cable)
Adapter for Testing Single-Phase Extension Cables (Straight Cable)
Plug Inserts for Germany - SCHUKO System
Plug Inserts for Germany - SCHUKO System, Angled
Plug Inserts for according to SEV
Plug Inserts for PROFiTEST - for PE Measurements and the like
Plug Inserts for PROFiTEST with 3 Connector Cables for Any Connection Standards
Adapter for Connecting 4 Wires for Earth Measurement
Leakage Current Measuring Adapter for PROFITEST MXTRA
Clamp Adapter for Connecting a Clamp Meter to the Test Plug
Magnetic Measuring Tips with Contact Protection - Set with Magnetic Holder
Probes Set, CAT III @ 600 V, 1 A for PROFITEST Master
Flat Test Clip, CAT IV @ 1000 V, 32A for PROFITEST Master
3-Phase Current Adapters for Test Instruments and 5-Pole CEE Outlets
3-Phase Current Adapters for Test Instruments and 5-Pole CEE Outlets
3-Phase Current Adapters for Test Instruments and 5-Pole CEE Outlets
Plastic System Case for Testers and Accessories
Foam insert for tester PROFITEST MASTER and accessories
Foam insert for tester PROFITEST INTRO and METRISO BASE, PRO, TECH, INTRO and accessories
Aluminium Case for Testers and Accessories
Ever-ready Case for PROFITEST MASTER with Outside Pocket for Accessories
Universal Carrying Bag
Universal Carrying Pouch Big
Universal Carrying Pouch Big
Hard Case for 1 Tester C Series and Accessories
Hard Case for 2 Testers C Series and Accessories
Ever-ready Case for PhaseCop 2
Ever-ready Case for Testers
Current Sensor Clamp, 1mA to 15A / to 150AAC, adjustable
Current Sensor Clamp 1/10/100/1000 AAC, selectable
Flexible Current Sensor 3/30/300 A, 1V-10mV/A, Loop length 450 mm
Rechargeable Battery Pack, welded
Charger for Master Battery Pack - for PROFITEST MBASE, MTECH
Charger for Battery Pack - for PROFITEST, METRISO, SECULIFE IP
Barcode Scanner with Laser for Test Instruments with RS 232 Port
Barcode Entry Tool (CODE 128)
Adapter Set for Photovoltaic Tester
Adapter Set for Photovoltaic Tester
Sensor for Irradiation, Temperature and Inclination
Magnetic Measuring Tips for Photovoltaic Testers - Set with Magnetic Holder
In our Download Center you will find all documentations from the product area in English.
If you have questions about the product, need technical information or the current delivery time? Our sales department will be happy to help you!
Sales Support
Sales
Telephone: 732-287-3680
Under myGMC you can register your product, and receive up-to-date information on firmware updates, standard changes and much more.
