Subject: SECUTEST S2N + and SIII +
The following settings must be made in the switch positions Line, Passive, Active and EDP on the S2, on the SIII in the Auto position for the test sequences VDE 0701-0702, EN62353 / VDE0751 and EN60601:
Select one of these settings and use the down arrow key to go to SETUP and then to Database.
There must in the setting ID no. = Test procedure and at ID no. = 000 At start with ID no. you can put an X, but you do not have to.
When going back, save the setting If you do this with all the other settings, then the ID should be saved correctly.