• Gossen Metrawatt
  • Gossen
  • Camille Bauer

METRACLIP 63

Thank you

Item number: M311G

Milliampere Current Clamp for Measuring Fault and Process Signal Current

The milliampere clamp is very well suited for the measurement of small direct and alternating currents as of a value of 1 mA.

  • m311g-metraclip63_front_09014a.jpg

It’s equipped with a power saving circuit, a data interface, indication of exceeded measuring ranges and a flexible current sensor, and can be used even under very unfavorable mechanical conditions.

  • Technical characteristics
    • Measuring ranges: - DC 100 mA / 1000 mA, - AC 100 mA / 1000 mA / 10 A
    • Switching back and forth between DC and AC measurements
    • Zero balancing for DC measurements
    • Measured value storage (DATA HOLD)
    • Power saving circuit
    • Current clamp with 1.2 meter cable length
    • Clip opening 5 mm Ø
    • Analog output (0 ... 100 mV) for connecting recorders, e. g. multimeters with memory

Download Center

In our Download Center you will find all documentations from the product area in English.

More Topics

Contact

If you have questions about the product, need technical information or the current delivery time? Our sales department will be happy to help you!

Sales Support
Sales

Telephone: 732-287-3680

Send message

myGMC

Under myGMC you can register your product, and receive up-to-date information on firmware updates, standard changes and much more.